SKF 609-2RSH/B426F7 Single Row Ball Bearings

Fatigue limit load, Cu:96.2 kN; Radial clearance class:C3; d2:156.9 mm; Min operating temperature, Tmin:-40 °C; rs min:3 mm; da min:134 mm; Dynamic load, C:1,170 kN; ra max:2.5 mm; D1:224 mm; Brand:SNR;

Flange O.D. H(φ):60; Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; Type:Bearings with Housin; Width T(mm):50; Days to Ship:7 Days; Bearing I.D. d(mm):20; Flange Shape:Round Type; RoHS:6; Bearing Part Number:6804;

D:13.7460 in; G1 - Heat Generation Factor (Roller-Raceway)11:1180; Y1 - ISO Factor9:1.91; Cup Part Number:127135; r - Cup Backface To Clear Radius2:0.130 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:38500 lbf; Design Units:Imperial; K - Factor7:1.65; Y2 - ISO Factor10:2.85; R -

L:245 mm; T max.:100 °C; G:M6x1; H2:129 mm; A:67 mm; Recommended tightening torque for set screw:16.8 Nm; C:53 kN; T min.:-20 °C; C0:31.8 kN; d:41.28 mm;

S:6 mm; s1:11 mm; A:25.5 mm; Designation of housing:FL203N-; A2:31 mm; Dz:46 mm; N:12mm; Weight:0.41 kg; G:M6x1; e:15 mm;

Dimension L Exp:3.86 in; Full Timken Part Number:99999B; Weight:52.2 lb; Pre Install Clearance Max:0.145 mm; Locking Style:Eccentric; Dimension L Fix:3.78 in; Dimension N:5.320 in; Dimension K:1.25 in; UPC Code:0883450145763; Shaft Size Type:Imperial;

J1:40 mm; T min.:-20 °C; G:M6x1; C0:6.65 kN; N:10mm; Designation of bearing:UC202G2; L1:54 mm; S:12.7 mm; B:31 mm; C:12.8 kN;

Bearing Part Number:6804; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Flange O.D. H(φ):60;

Dimension T:17.5 in; Cr - Dynamic Load Rating:71040 lbf; Support Type:Take-Up; Bearing UPC:013992027894; Bearing - Housing - Seal:LSM110BRHATL; Ca - Axial Load Rating:4181.39 lbf; Dimension S:2.8 in; Dimension X:1.7 in; Series Type:Light Series; Cor - Static Load Rating:95993 lbf;

Z:23 mm; N:20mm; d:49.21 mm; H2:114 mm; A:60 mm; Recommended tightening torque for set screw:18.7 Nm; s1:25.8 mm; H1:22 mm; C:27.5 kN; B:51.6 mm;

Grease Type:Standard Grease; Bearing Inner Dia. Shape:Tapered hole adapter; Machining:No; Bearing Unit, Type:Diamond Flange Shape; Surface Treatment:No; Fit:J7; Fit:J7; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):229000; Stroke:No;

N:18mm; T max.:100 °C; Z:92.3 mm; Recommended tightening torque for set screw:22 Nm; Designation of bearing:US212G2; Weight:4.64 kg; A:60 mm; L1:71 mm; H1:25 mm; H2:140 mm;

Inside Ring Width B:=Bearings1_Inside Ri; Inside Ring Outside Diameter:2.280 in; Base to Center Height H:52.39 mm; Dimension T:1.031 in; Dimension D1:2.280 in; Dimension B1:1.984 in; Total Width A:2.063 in; Shaft Size d:1 3/4 in; Bolt Hole Spacing J:149.2 mm; Dimension L1:63.8 mm;

Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Height H(mm):25 ～ 40; Height Indication:Height Configurable; Bearing Part Number:6001; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Shape:L-Shaped; RoHS:6;

D:72.63 mm; Min operating temperature, Tmin:-40 °C; B:24.26 mm; d1:49 mm; Y0:0.55; Brand:NTN; Mass:0.48 kg; Characteristic cage frequency, FTF:0.4 Hz; Nlim (oil):7,700 rpm; r1a max:1.5 mm;